Page_Fault_in_Nonpaged

23 Oct 2008 2:53 AM

JCO

To give some history:
I got an error after doing a restoration of an Image created by Acronis True
Image. But the original error was: "Non-System Disk, Press Any Key" Then
it would boot and run fine. I fixed this error by repairing the Master Boot
Record (FixMBR) which led me to this issue. Now, ever time I shut down,
after windows saves all settings, I get a bluescreen, error stop code
00000050, Page_Fault_in_Nonpaged_Area.

Now I know this can be just about anything but I'm not running any different
hardware or software. That is why I wanted to give the history....
restoring from the Image, which was up to date.

Any other ideas?

23 Oct 2008 12:33 PM

philo

Show quote Hide quote

"JCO" <some***@somewhere.com> wrote in message
news:uGF6TqLNJHA.1160@TK2MSFTNGP05.phx.gbl...
> To give some history:
> I got an error after doing a restoration of an Image created by Acronis
> True Image. But the original error was: "Non-System Disk, Press Any Key"
> Then it would boot and run fine. I fixed this error by repairing the
> Master Boot Record (FixMBR) which led me to this issue. Now, ever time I
> shut down, after windows saves all settings, I get a bluescreen, error
> stop code 00000050, Page_Fault_in_Nonpaged_Area.
>
> Now I know this can be just about anything but I'm not running any
> different hardware or software. That is why I wanted to give the
> history.... restoring from the Image, which was up to date.
>
> Any other ideas?
>
>

If your original drive boots normally, then something went wrong in the
cloning.

If you get the same error with both drives, try running a RAM test

23 Oct 2008 11:50 PM

JCO

Okay, it was a bad image. I recovered from an earlier image and every thing
is okay.
Thanks

Show quoteHide quote

"philo" <ph***@privacy.net> wrote in message
news:#03I#tQNJHA.5060@TK2MSFTNGP02.phx.gbl...
>
> "JCO" <some***@somewhere.com> wrote in message
> news:uGF6TqLNJHA.1160@TK2MSFTNGP05.phx.gbl...
>> To give some history:
>> I got an error after doing a restoration of an Image created by Acronis
>> True Image. But the original error was: "Non-System Disk, Press Any Key"
>> Then it would boot and run fine. I fixed this error by repairing the
>> Master Boot Record (FixMBR) which led me to this issue. Now, ever time I
>> shut down, after windows saves all settings, I get a bluescreen, error
>> stop code 00000050, Page_Fault_in_Nonpaged_Area.
>>
>> Now I know this can be just about anything but I'm not running any
>> different hardware or software. That is why I wanted to give the
>> history.... restoring from the Image, which was up to date.
>>
>> Any other ideas?
>>
>>
>
>
> If your original drive boots normally, then something went wrong in the
> cloning.
>
> If you get the same error with both drives, try running a RAM test
>

Thread options